Contact Us for further information about any of these high quality snow blowers.  Note that these are candidate listings of projects that may or may not become available this season. Pictures and information may vary from actual machine configuration.  Each snow blower includes all accessories listed. Please check back for latest availability.

Prices: $399-$1,099    Status: SEE BELOW    Scroll down for more information.

ARIENS ST724 Status: AVAILABLE NOW Price: $399

• This 924000 Series Ariens ST724 is built like a tank and among the best ever made by Ariens

• Heavy-duty construction throughout with heavy gauge steel tractor casing and snow box, big thick augurs, sturdy internal assemblies, steel chute

• Tecumseh Snow King 7.0 HP, 246 cc engine is big and powerful with plenty of torque

• Engine completely rebuilt with new short block and connecting rod, and new head, valve cover, intake, exhaust, and sump gaskets

• Push button, 120V electric starter and recoil backup with mitten grip handle (installed after photos taken)

• Disc-O-Matic™ friction disc drive with 5 forward and 1 reverse speeds

• Forward speeds: 5 gears - 0.8 to 2.8 mph, Reverse Speed: 1 gear - 1.0 mph

• Large capacity steel chute with round-to-round transition from impeller outlet to chute base helps prevent clogging

• Chute rotates 230 degrees enabling discharge to the rear

• Commercial controls, all located on the dash, including on/off key switch, throttle, gear selector, chute rotation crank, safety handle, augur engagement, and traction drive handle

• Augur/drive handle interlock allows for single-handed operation and chute adjustments while operating

• Adjustable jet on the carburetor ensures easy starting and efficient operation under varying weather conditions

• Large, 14 inch, clawed, 4-blade impeller

• Cast aluminum gearbox with heavy-duty worm and roller gear

• Large, thick, 14 inch, ribbon steel (rolled single piece) augurs with dual grease fittings to lubricate the axle

• 4.10 inch tires with tire chains provide exceptional traction under the most challenging conditions

• 3-bolt automotive style wheels allow easy removal and remounting of wheels and tires

• Wear-resistant, high-carbon steel scraper bar

• Heavy-duty, steel skid shoes

• Original rust-resistant, powder coated orange finish

• Will accept an electric starter

• Entirely made in the U.S.A.

• Throwing distance: up to 30 feet

• Dimensions: Length: 60 inches, Width: 26 inches, Height: 40 inches, Weight: 245 lbs

• Made in the U.S.A.

• Includes: extended electronic documentation set

TROY-BILT STORM 8526    Status: AVAILABLE NOW    Price: $449

• User-friendly Troy-Bilt 8.5 hp, 26 inch, dual stage snow blower in excellent condition

• Thoroughly refurbished with new OEM parts and serviced (platinum spark plug, synthetic oil, fuel system cleaning, adjustments, chassis lubrication)

• Service Bulletin completed that upgrades the engine shroud to provide improved engine cooling

• 26 inch clearing width, 21 inch intake height efficiently handles deep snow

• Tecumseh Snow King 8.5 HP, 318cc engine with electronic ignition provides plenty of snow-crushing power

• Push button, 120V electric starter and recoil backup with mitten grip handle

• Reliable friction disc drive ensures smooth shifting into any of 6 forward and 2 reverse speeds

• Quad 12 inch, notched steel augurs (each with its own shear pin) break away separately for greater security

• 12 inch, 3-Blade clawed impeller discharges and throws snow up to 35 feet

• Extra tall chute with large round-to-round transition prevents clogging and sends snow higher and farther for enhanced clearance

• Quick-Adjust Chute joystick employs a single handle for chute rotation and deflector angle to direct snow where you want it

• Augur/drive handle interlock allows for single-handed operation and chute adjustments while operating

• Headlight provides visibility and extra safety during night-time operation

• Big 15 x 5.0 inch X-Trac tires on 6 inch wheels deliver extraordinary traction in adverse conditions without the need for chains

• Convenient dashboard-mounted controls include the chute joystick, gear selector, augur engagement, and drive handle

• Wear-resistant steel scraper bar

• Reversible skid shoes last longer and allow height adjustment of the augur box to accommodate uneven surfaces

• Throwing Distance: up to 35 feet

• Rust resistant for long-term use

• Made in the U.S.A.

• Accessories: Chute clean-out tool (not shown)

• Includes: Extended electronic documentation set

TORO SNOW COMMANDER 724    Status: AVAILABLE NOW    Price: $699

• Sturdy, heavy-duty, top-of-the-line Toro 24 inch, single stage, 2-Cycle, 7.0 HP snow blower in outstanding condition!

• Wide 24 inch clearing width and tall 16 inch intake height makes for efficient residential snow clearing

• Heavy-duty construction with new augur paddles

• Toro R-TEK 7.0 HP, 2-cycle engine provides effortless power, easy starting, and low maintenance

• Ignition switch by key provides extra security

• Operates on gas/oil mixture and needs no oil changes ever!

• "Power Propel" traction drive pivots the front of the snow blower downward to engage the rotor blades with the ground

• Toro’s patented drum-style 8 inch diameter rotor with heavy augur paddles regulate delivery of snow to the chute to prevent clogging

• Revised to accept easy bolt-on replacement of augur paddles (at very low cost compared to original Toro R&R of entire augur assembly!)

• Steel chute with plastic deflector offer greater longevity

• Easy to reach, oversized adjustment handles for chute rotation (210 degrees) and deflector angle enhance ease of operation

• Large 6.2 inch chute throat diameter

• Curved handlebar offers comfortable operation and engagement of the augur rotor and drive via a safety bail handle

• Extra-large rubber cushioned wheels

• Easily fold the handlebar for compact storage or transport simply by loosening two hand knobs (no-tools)

• Convenient, up-front dashboard with controls including on/off key switch, primer bulb, recoil starter, and choke lever

• Large 1.2 quart fuel tank (50:1 gas/oil mixture)

• Will accept an electric starter (that you’ll never, ever need!)

• Rust-proof, plastic body

• Made in the USA

• Dimensions: Length: 51.3 inches, Overall Width: 24.3 inches, Height: 40.4 inches, Weight: 113 lb

• Includes: extended electronic documentation set

TROY-BILT POLAR BLAST 10530    Status: AVAILABLE NOW    Price: $1,099

• This Professional Troy-Bilt Heavy-Duty 30 inch snow blower is an extremely robust and sturdy, extra-large chassis machine.
  Note: The Polar Blast is a substantial, commercial-grade machine that is wholly unrelated to the significantly smaller and lighter residential Storm series.

• Completely refurbished from top to bottom

• Newly refinished snow box using a 10-step process with 3 coats of rust-inhibiting primer and 4 coats of finish enamel

• Thoroughly repaired with new OEM parts and serviced (platinum spark plug, synthetic oil, fuel system cleaning, adjustments, chassis lubrication)

• Service Bulletin Completed that upgrades the engine shroud to provide improved engine cooling

• 30 inch clearing width, 22 inch intake height efficiently handles very large amounts of snow

• Tecumseh Snow King 10.5 HP, 358cc engine with electronic ignition provides plenty of reliable, snow-crushing power

• Push button, 120V electric starter and recoil backup with mitten grip handle

• Heavy duty, friction disc drive system ensures smooth shifting into any of six forward and two reverse speeds

• Large augur gear case and heavy duty worm gear ensure greater reliability and long life

• Extra-large 16 inch, notched steel augurs cut through and crush the toughest snow and dense snow banks

• Heavy duty, 16 inch, 4-Blade, clawed impeller powerfully discharges and throws snow up to 40 feet

• Extra tall chute with large round-to-round transition prevents clogging and discharges snow higher and farther for enhanced clearance

• Remote chute deflector adjusts deflector angle to direct snow where you want it

• Power steering via triggers on each handle allow the operator to steer to the left or right or engage 2-wheel lock-up for extra traction

• Augur/drive handle interlock allows for single-handed operation and chute adjustments while operating

• Twin headlights offer superior visibility and safety

• Huge 16 x 6.5 inch X-Trac tires on 8 inch wheels deliver extraordinary traction no matter the conditions

• Convenient dashboard controls, including the chute and deflector, gear selector, axle triggers, augur engagement, and drive handle

• NEW wear-resistant, steel scraper bar

• Heavy duty skid shoes enable height adjustment to accommodate uneven surfaces

• Throwing Distance: up to 40 feet

• Dimensions: Weight: 300 lbs, Length: 68 inches, Height: 38 inches, Width: 31.5 inches

• Rust resistant for long-term use

• Made in the U.S.A.

• Accessories: Drift cutters (shown in retracted position on the sides)

• Includes: CD with extended documentation set

All images copyright Jay's Power Equipment.  All rights reserved.  Not responsible for errors or omissions.